Grinding Room Accessories
Template Services, Inc. carries a large line of the most common needs of millwork shops that make their own tooling. From blank template stock to knife rests for your grinder, with good quality supplies we hope to make your "daily grind" a little easier.
Ohaus- Harvard Trip Balance Scale . These scales feature a traditional two-pan design based on the classic Roverbal balance principle and are great for balancing moulding knives to 1/10 of a gram or even better. Call Andrew for a few balancing tips and techniques. .................................325.00
Kool-Mist Grinding Coolant. This coolant is great for grinding. It lubricates the cut and controls rust. The best thing about this coolant is that it has very little odor, and is very gentle on people that have coolant sensitivities. Use with distilled or soft water for best results. 40:1 coolant ratio.........42.50 per gal.
Blank Template Stock. 5" x 13.5" acrylic blanks cut perfectly on todays
template makers. They are 3/16 thick and red in color. Fill up a flat rate USPS
priority box for the best rate on fast shipping............................6.50 each
Router Bits for CNC template makers.............................................8.75 each
Rubber Abrasive Sticks. 7 1/2" x 1" x 1/4" course sticks are perfect for
deburring knives after grinding. They are also great for removing pitch, and burnt wood accumulation from knives. ...........................................12.50each
Grinding Pins ( Styluses )
We can supply all common shapes and sizes for most grinders out there. The below sizes come in a rectangular shape with one side radiused to the width of the pin and the other side squared.
Weinig
Wadkin
SCMI
Foley
Price
1.5mm
1/16"
1/16"
1/16"
47.50 All machines
2mm
2mm
1/8"
1/8"
47.50 All machines
3mm
1/8"
3/16"
3/16"
47.50 All machines
4mm
4.7"
1/4"
1/4"
47.50 All machines
V-Point
V-Point
V-Point
V-Point
55.00 All machines
Bearing
Bearing
Bearing
Bearing
79.75 All machines
Tool Rest
The tool rest supports the knife as you are grinding, they wear slowly and should be replaced regularly to maintain grinding performance.
Weinig
Wadkin
SCMI
Foley
213.00
55.00
165.00
57.50
Diamond Dresser's
Single point diamond dressers are for dressing grinding wheels down to size as well as shaping the wheel for points or corners.
Weinig
Wadkin
SCMI
Foley
47.50
47.50
47.50
77.50
Can't find it? Even if it's not on our website, we can get most of your favorite grinding gizmos and doo-hickeys at competive prices . Just give us a call 702-641-2020